• Creator
    Topic
  • #2027534
    Avatar Of LightLight
    Participant
    Post count: 3

    I usually use shellac or wipe on poly for finishing my bowls, depending on how tough of use they are likely to receive. I always figure poly is going to wear better than shellac, but I like the look and feel of shellac better. Does anyone have any other suggestions for a durable finish on bowls and other turned items that are not used for eating?

Viewing 0 reply threads
  • Author
    Replies
    • Avatar Of Sethmsethm
      Participant
      Post count: 6

      Have you tried wet sanding with 0000 steel wool after the wipe on poly? I usually wet sand with the 0000 steel wool until the surface looks dull and then go over it with a wax. I find that it leaves a nice smooth surface to the touch similar to shellac.

      • Avatar Of LightLight
        Participant
        Post count: 3

        Thanks, I will give that a try. I have a few pens to make, but will be making some additional bowls for Christmas gifts.

Viewing 0 reply threads
  • You must be logged in to reply to this topic.