Avatar Of JavierodechileJavierodeChile
Participant
Post count: 1

Hello everyone:

I already bought a N°6 Bailey plane with some parts missed and other parts damaged so I asked person to manufacture some screws in a lathe but here in Chile we normally use “metric” screw so he asked me to provide more information and I found a website with this technical information but I’m not sure if threads information id correct for this specific plane:
<p style=”box-sizing: inherit; margin: 1.75rem 0px; color: rgba(0, 0, 0, 0.9); font-family: Barlow, arial, helvetica, sans-serif; font-size: 19px;”>Cap Iron screw : 5/16” 18tpi BSW (I believe this is the only standard BSW thread on benchplanes)<br style=”box-sizing: inherit;” />Frog screws : 7/32” 20tpi Whitworth;<br style=”box-sizing: inherit;” />Tote & Knob bolts : 7/32” 20tpi Whitworth;<br style=”box-sizing: inherit;” />Tote Toe screw : 7/32” 20tpi Whitworth;<br style=”box-sizing: inherit;” />Frog Adjusting Plate screw : 7/32” 24tpi Whitworth;<br style=”box-sizing: inherit;” />Frog Adjusting screw : 1/4” 24tpi American/Unified;<br style=”box-sizing: inherit;” />Brass Adjusting nut : 9/32” 24tpi American/Unified (left-hand thread);<br style=”box-sizing: inherit;” />Lever Cap screw : 9/32” 24tpi American/Unified.</p>
<p style=”box-sizing: inherit; margin: 1.75rem 0px; color: rgba(0, 0, 0, 0.9); font-family: Barlow, arial, helvetica, sans-serif; font-size: 19px;”>T5 Side Handle 1/4” 20 tpi BSW For later models. Earlier models are supposed to be 7/32” 20tpi Whitworth</p>
Please let me know if this is the correct information of all the parts that I’m looking for.

Thanks in advance for your support

Javier Corral